Hydro-Pro 7018522, Руководство пользователя и обслуживания

Страница: 37 / 193

- 36 -
12 rubber ring 42 Terminal
13 Base tray 43 Temp. controller fixture
14 Gauge 44 Temp. controller
15 Waterproof connection 45 Clip
16 Water connection 46 Terminal
17 rubber ring 47 Wire cover
18 Heat exchanger 48 Electric box cover
19 Water flow switch 49 AC contactor
20 Outlet water temp. sensor clip 50 Water pump terminal
21 Outlet water temp. sensor 51 Phase protection board
22 Inlet water temp. sensor clip 52 Distributor assembly
23 Inlet water temp. sensor 53 Capillary assembly
24 Segregator 54 Low pressure switch
25 Left panel 55 4-way valve to segregator
26 Front panel 56 4-way valve to heat exchanger
27 Piping temp. sensor 57 4-way valve
28 Service panel 2 58 Return pipe
29 Service panel 1 59 Ambient temp. sensor
30 Electric box support panel 60 Ambient temp. sensor clip
10. Maintenance
(1) You should check the water supply system regularly to avoid the air entering the system
and occurrence of low water flow, because it would reduce the performance and reliability of
HP unit.
(2) Clean your pools and filtration system regularly to avoid the damage of the unit as a result
of the dirty of clogged filter.
(3) You should discharge the water from bottom of water pump if HP unit will stop running for
a long time (specially during the winter season).
(4) In another way, you should check the unit is water fully before the unit start to run again.
(5) After the unit is conditioned for the winter season, he is preconize to cover the heat pump
with special winter heat pump.
(6) When the unit is running, there is all the time a little water discharge under the unit.