background image

Pro Mist 35 User Manual 

www.HydroMistUSA.com 

20 

 

8. Warranty

 

HYDROMIST ONE (1) YEAR 

LIMITED WARRANTY

 

All  Hydromist  products  are  warrantied  for  a  period  of  one  (1)  year  for  defects  in 

workmanship and materials under normal use and service. This warranty is extended 

solely to the original purchaser.

 

 

In General: If a Hydromist product fails because of defect in material or workmanship 

under normal use and maintenance within one year from date of purchase, we will, 

at our option and after inspection, repair or replace the defective product.

 

 

About your Warranty:  Hydromist  products,  like  all mechanical devices, need 

periodic maintenance and service to perform  correctly. Normal use and service 

means  not  to  operate  in  excess  of  recommended  maximum  speeds,  pressures, 

temperatures  or using fluids not recommended or compatible with component 

materials.

 

This warranty does not apply to any component which has been repaired or altered 

to affect the performance, or reliability of the product. Similarly, the warranty is void 

if the manufacture date or the serial number has been removed or if the equipment 

has been altered or modified.

 

Hydromist does not warranty components due to normal wear including nozzles, 

pumps, motors, and seals. Hydromist does not warranty components due to misuse, 

abuse, neglect or improper maintenance,  shipping, handling, warehousing or 

improper installation. This warranty excludes wear items such as water filters, spray 

nozzles, or pumps that have been run without water supplied or oil filled to specified 

capacities; damage or malfunctions resulting from accidents, abuse, modifications, 

alterations,  or improper servicing or freezing or chemical deteriorations. This 

warranty excludes failures due to acts of God and other force majeure events beyond 

the manufacturer’s  control.

 

This warranty does not cover normal maintenance such as oil changes, water filters, 

adjustments, or cleaning, etc. This warranty does not cover damage from lack of 

maintenance (lack of oil or water filter changes) freezing, and obstruction (due to 

scale, lime, dirt, chemicals, etc.)

 

Hydromist is not responsible for the removal and shipping of the system to Hydromist 

or a service provider, the reinstallation of the product upon its return to the customer, 

or  any  incidental  or  consequential  damages  resulting  from the defect, removal, 

reinstallation, or shipment of the product.

 

 

Continued on next page… 

 

 

 

Содержание F10-04-003

























Отзывы: