Hydro-Force Power X Pro Spot MA51 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 35

Hydro-Force Power X Pro Spot MA51 Скачать руководство пользователя страница 3

3

Introduction

Congratulations on your purchase of the Hydro-Force Power X Pro Spot
Extractor. The Power X Pro Spot Extractor is designed to combine versatility
with ease of transport. Years of experience, engineering, and planning have gone
into the design and manufacturing of the Power X Pro Spot Extractor. We take a
great deal of pride in the Power X Pro Spot Extractor; our goal is no less than
your complete satisfaction.

This manual will provide users with the knowledge required to operate the Power
X Pro Spot Extractor safely, to understand how to properly operate and maintain
the machine, and to ensure that the equipment operates at its maximum
performance level.

All users must read and understand this manual completely before
operating the machine.

Always maintain this manual in legible condition adjacent to the Power X Pro
Spot Extractor, or place in a secure location for future reference.

Any questions pertaining to the operating or servicing of this unit should be
directed to your nearest Hydro-Force distributor.

This manual is written specifically for the Power X Pro Spot Extractor units
manufactured by:

Hydro-Force
4282 South 590 West
Salt Lake City, UT 84123
801-268-2673
801-268-3856 FAX

Information in this manual is subject to change without notice and does not
represent a commitment on the part of Hydro-Force or its parent or affiliated
companies.

«
1
2
3
4
5
...
»

Содержание Power X Pro Spot MA51




































Отзывы:

Нет отзывов