Hydro-Force Nautilus MX3-500H Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 57

background image

57

Your Nautilus MX3-500H is designed to give you years of reliable service. If a problem should arise use the
troubleshooting section in the operation manual to diagnose and correct the problem if possible.

If you are unable to determine the cause or solution to the problem contact your distributor or Hydro-Force
for assistance.

Hydro-Force warrants the roto-molded tanks and base of the Nautilus MX3-500H to be free from defects in
material or workmanship for five years from the date of purchase.
All other components of the Nautilus MX3-500H are warranted to be free of defects in material and
workmanship for one year from the date of purchase.

During the warranty period, Hydro-Force will, at its option, repair or replace components which prove to be
defective. This warranty does not provide for replacement of complete units due to defective components.
Any costs for transportation or related service labor are not covered in this warranty. Replacement parts are
warranted only for the remainder of the original warranty period.

This warranty shall not apply to defects resulting from improper operation, lack of maintenance,
unauthorized modification, chemical incompatibility, misuse, abuse or exposure to freezing temperature
conditions. It does not cover normal wear items such as o-rings, valve seals, pump seals, hoses, jets, cords,
batteries, or other items which require replacement as a result of ordinary usage.

To obtain warranty service for the Nautilus MX3-500H, contact your distributor or Hydro-Force. If the
extractor must be returned to Hydro-Force or an authorized service center, the purchaser shall prepay
shipping charges for products returned for warranty service. No returned items will be accepted by Hydro-
Force without prior authorization. All returns must have a return authorization number, issued by Hydro-
Force, clearly marked on the exterior of the package.

Hydro-Force makes no other warranty either expressed or implied with respect to this product.

The remedies provided herein are the purchaser’s sole and exclusive remedies. In no event shall Hydro-Force
be liable for any direct, indirect, special, incidental or consequential damages.

This warranty gives you specific legal rights. You may also have other rights which vary from jurisdiction to
jurisdiction.

Section

4

Limited Warranty

«
...
55
56
57

Содержание Nautilus MX3-500H


























































Отзывы:

Нет отзывов

Похожие инструкции для Nautilus MX3-500H

Бренд: Clemas & Co Страницы: 32

Бренд: Windsor Страницы: 125

Бренд: Viper Страницы: 28

Бренд: ServiceMASTER Clean Страницы: 20

Бренд: Ice Страницы: 78

Бренд: Global Страницы: 5

Scrubmaster B175 R

Бренд: HAKO Страницы: 124

BR 60/95 RS Bp Pack

Бренд: Kärcher Страницы: 322

Бренд: Taski Страницы: 11

Бренд: Taski Страницы: 103

Бренд: HAL Extraction Страницы: 22

Бренд: Jefferson Страницы: 2

Бренд: U.S. Products Страницы: 16

Бренд: Ryobi Страницы: 24

Бренд: Ryobi Страницы: 84

Бренд: Onyx Страницы: 24

Бренд: BM2 BIEMMEDUE Страницы: 60

KLARKE SCRUBTEC R 571

Бренд: Alto Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды