Hydro-Force MA72, Руководство пользователя

Страница: 5 / 20

5
SET UP AND OPERATION:
1. Electrical Specifications:
The Spot Extractor is equipped with a 20 foot power cord and is designed to work with a 115VAC 15
or 20 amp circuit. These outlets are commonly found in homes and commercial buildings.
2A. Water Supply – Manual Fill:

Pour up to 2.8 gallons of hot water into the solution tank at the front of the machine.
THE WATER TEMPERATURE CANNOT EXCEED 190

F.
DO NOT RUN OUT OF WATER WHILE USING THE
MACHINE.
Ensure that the tank contains enough water to complete each job. If the water level is low: stop
cleaning, turn off the pump and vacuum, empty the recovery tank, and refill the solution tank.
Running the pump dry may damage the pump and void the warranty.
Step 1–Release Butterfly Latch (CCW)
Step 2–Remove Recovery Tank using Top-Center
Handle
Step 3–Open Splash Lid Step 4–Pour In Water (up to 2.8 gallons)