Complete Sprayer Diagram
*lid is included
Unused batteries can lose their charge . Test the sprayer before using on a job to
ensure that the battery is charged. See the “Charging” section for instructions on
how to charge the battery.
1. Fill chemical container with desired chemical and place container in the Flexi Pro
Sprayer.
2. Place the chemical feed hose into the chemical container and secure the cap.
3. Turn the switch to the ON position and spray into a container until pump is
primed. Turn the switch to the OFF position.
(Properly dispose of the sprayed chemical.)
4. Place the proper size jet on the spray gun for the present application.
5. Move the sprayer to the location where the sprayer is to be used.
6. Turn the switch to the ON position and spray chemical as needed.
7. When the job is completed, turn the switch to the OFF position.
8. Return the sprayer to your van.
9. Remove the chemical feed hose from the chemical container and replace the
solid cap for storage.
10. Place the chemical feed hose into a container filled with water.
11. Turn the switch to the ON position and spray into a container until the chemical
is flushed out of the pump and hoses.
(Properly dispose of the sprayed chemical and water.)
12. Turn the switch to the OFF position and return the sprayer to its storage spot in
your van.
13. Connect the charger to the sprayer and plug the charger into the van power
source.
Operation
is a switchmode taper charger and can remain connected to the Flexi Pro Sprayer for
extended periods (months) to maintain the battery charge when the sprayer is not
being used. Do not store battery in a discharged state. Connect the charger before
storing sprayer. Warning: Old Style Wall Chargers (NM4108 & NM4108A sold before
September 2008) can only be used for a maximum of 12 hours. Overheating of the
battery will occur with longer charging time, with the result being reduced battery
life or, with extreme cases, battery failure. If you are unsure of which charger you
have contact Hydro-Force for assistance in identifying your charger.
Charging
(continued)
13
4
