Wide Bottom:
prevents the sprayer from tipping over
Translucent Bottle:
make it easy to see the level of chemical
2 1/2 Gallon Bottle:
the sprayer holds more chemical, allowing less
frequent refilling.
Removable Bottle:
allows for quick chemical switching
Large cap:
enables easy refills and less chance of spills
15 Feet of Coiled Hose:
Prespray upholstery with sprayer in one
position
Built In Extension Holder:
Keep out of the way on truck
Large Wheels:
Easy movement on commercial jobs or large rooms
Extendable Handle:
for easy transportation and movement
Extra Jets Easily Attached:
move from carpet prespray to upholstery
prespray to protector with different jets
Easy Priming and Rinsing of Lines:
removable jets
Easy to Recharge:
Car Charger NM4109A - Plugs into vehicle cigarette
lighter to top-off battery charge between jobs. AC Wall Charger
NM4109B - Plugs into 110v wall outlet for long term chargin. Both
chargers included with every sprayer.
See “Charging” section for specifics.
Length of Charge:
sprays up to 45 gallons on full charge
Easy to Fix:
remove 6 screws to service pump or battery
Sealed Cavity:
pump and battery protected from spills
Flojet Water Pump:
durable, easy to maintain, self-priming
Rotomolded Plastic:
proven to last for years
Features and Benefits
Hose
Length: 15’
Diameter: 3/8” OD / 1/4” ID
Charger
110 V Included
12 V Included
Battery
Sealed, Rechargable
Volts: 12.0
Amperage: 8.0 amp hours
Fuse
Amps: 10
Specifications
Pump
Flow: 1 gallon/minute
Pressure: 50 psi
Voltage: 12 VDC
Amperage: 4.0
Jets
Pre-spray:
Veejet, Hydro-Force
part # B281, size = 8005
Protectant:
Teejet, Hydro-Force
part # B006, size = 6501
Troubleshooting
Pump not turning
on - No power
Battery not
charging
Not spraying
properly
Solution dripping
from jet with
valve closed
Problem Cause
Solution
Battery not charged
Fuse Blown
Battery faulty
Faulty switches or internal wiring
Pump motor faulty
Pump seized
Recharge battery - (see Charging)
Check fuses - Replace as needed
Replace battery
Check wiring & test switches - repair
as needed
Replace pump motor
Repair or replace pump head &
bearing - Check motor
Failure to follow Charging
instructions
Power source out
Fuse blown
Battery faulty
Charger faulty
Faulty internal wiring
Review Charging section
Check fuses - Replace as needed
Find a different power source
Replace fuse & check for shorts
Replace battery
Replace charger & check fuse
Check wiring - Repair as needed
Jet clogged
Jet worn
Chemical hose not submerged
in jug
Chemcial filter clogged (intake)
Air leak in chemical hose (intake)
Chemical hose restricted (intake)
Chemical jug not vented
Spray hose restricted (outlet)
Spray valve faulty
Debris in pump head
Pump faulty
Battery not charged
Battery faulty
Faulty switches or internal wiring
Chemcial to thick to pump
properly
Clean or replace jet
Replace jet
Make sure end of chemical hose
with filter is in the chemical
Clean or replace filter
Repair or replace hose
Un-kink, clean out or replace hose
Remove cap - enlarge hole in cap
for hose
Un-kink, clean out or replace hose
Repair or replace valve
Clean out pump head - Replace
valves as needed
Repair or replace pump
Recharge battery
Replace battery
Check wiring & test switches
Charge chemicals - Must be similar
in viscosity to water
Spray valve faulty
Check valve faulty
Jet worn
Extension faulty
Rapair or replace valve
Replace check valve
Replace jet
Replace extension
3
14
