HydraMaster RX-20 700-041-006 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 52

HydraMaster RX-20 700-041-006 Скачать руководство пользователя страница 51

11-1: Warranty Information

RX-20

11 - Warranty Information

HydraMaster  warrants  Rotary  Extractor  machines  of  its  manufacture  to  be  free  from
defects  in  material  and  workmanship  if  properly  installed,  maintained,  and  operated
under  normal  conditions  with  competent  supervision.  No  person,  agent,  representative
or dealer is authorized to give any warranties on behalf of HydraMaster, nor to assume
for  HydraMaster  any  other  liability  in  connection  with  any  HydraMaster  products.  This
warranty shall extend to the original purchaser of said equipment for the periods listed
below  from  date  of  installation.  If  repairs  or  replacements  are  made  by  the  purchaser
without  HydraMaster’s  written  consent,  HydraMaster’s  warranty  shall  cease  to  be  in
effect.

Machinery, equipment and accessories furnished by HydraMaster, but manufactured
by others, are warranted only to the extent of the original manufacturer’s warranty to

HydraMaster unless otherwise specified in the listing below.

HydraMaster agrees, at its option, to repair at the point of shipment, or to replace without
charge, any parts or parts of products of HydraMaster’s manufacture, which within the

specified warranty period shall be proved to HydraMaster’s satisfaction to have been

defective when shipped, provided the purchaser promptly notifies HydraMaster, in writing,

of such alleged defect. HydraMaster will pay all freight and transportation charges within
the united States, via normal ground shipping means, for replacement of parts covered
under this warranty.

This warranty covers parts, as specified, and does not cover labor which may be necessary

in completing repairs. HydraMaster’s liability to purchaser, whether in contract or in tort
arising out of warranties, representation, instructions, or defects from any cause shall
be limited to repairing or replacing the defective part or parts. To qualify for warranty
coverage, defective parts must be returned to HydraMaster within 30 days. No warranty
liability whatsoever shall attach to HydraMaster unless and until HydraMaster has received
payment in full for the warranted machine or part.

Except as stated in this section and in the proceeding section and except as to title, there

are no guarantees or warranties of merchantability, fitness, performance or otherwise,

express, implied or statutory, and HydraMaster shall have no liability for consequential,
incidental or other damages howsoever caused.

All components not specifically referenced in the schedule below are covered under this

warranty for a period of one (1) year, excepting those parts which are considered, by
HydraMaster, to be expendable in normal use, including but not limited to paint, labels
and other cosmetic parts or features.

«
...
49
50
51
52
»

Содержание RX-20 700-041-006





















































Отзывы:

Нет отзывов