HydraMaster RX-20 700-041-006, Руководство пользователя, Страница: 23 / 52

6-1: Machine Maintenance
RX-20
6 - Machine Maintenance
good care and regular maintenance of your RX-20 will result in a long, dependable life
for the unit. Keep in mind that your RX-20 will be in full view of your customer. An RX-20
that is dirty and unkempt in appearance can cause your business or professional image
to suffer. you are offering your customer the latest in cleaning technology. Therefore, it is
important that your company image reflect your desire to give your customer the best.
The surface finish on your RX-20 is a durable, powder coating and is easily cleaned with
a damp cloth. To further protect the finish, a light coat of good silicon base polish should
be applied periodically.
lubrication and maintenance play a key role in the life of your RX-20. Hence, the following
daily and periodic maintenance steps must be followed. Train yourself to maintain your
unit on a regular schedule until it becomes habitual.
DAILY MAINTENANCE
disconnect the 1. RX-20 from the power source and inspect its power cord for cuts,
breaks and abrasions. Repair or replace as needed.
Inspect the vacuum hoses for breaks or tears. Repair or replace as necessary.
2.
Visually inspect your RX-20 for water leaks, wear damage to the cleaning heads, 3.
and so forth. Repair or replace as necessary.
Remove the inline solution filter screen by
4.
unfastening the nut showing through the
cut out on the back panel using a 15/16”
wrench. Remove the nut which houses the
inline filter (see
figure 6-1).
Rinse it under water to remove debris. If 5.
necessary, use a toothbrush to remove
stubborn particles.
Before re-inserting the nut/inline filter, check
6.
the O-ring on the inside of the nut/inline
filter. If the O-ring is cracked or damaged,
replace the O-ring.
Figure 6-1.
Remove Nut/Inline
filter