Page 5
www.hydraconnect.com
(
720-583-4364
HydraConnect LLC
6. Similarly, locate the receiver module within 6 feet (2 meters) of the display.
The receiver has permanently attached mounting brackets. Mount the re-
ceiver so that the status LEDs which are mounted on the side of the unit are
visible when you look behind the display.
IT IS IMPERATIVE THAT THE RECEIVER BE MOUNTED
HORIZONTALLY ON A VERTICAL WALL FOR PROPER
OPERATION AS SHOWN BELOW:
7. Connect a High Speed HDMI Male-to-Male cable between the receiver
module and the display.
8. If used, connect an IR Flasher or Receiver to the designated connectors.
NOTE THAT INSTALLING AN IR FLASHER OR RECEIVER INTO THE
WRONG CONNECTOR MAY DAMAGE THE MODULE WHICH WILL
NOT BE REPAIRED UNDER WARRANTY.
9. Plug the output power cable from the supplied 24VDC power supply into
the transmitter module. Plug the power supply into an electrical outlet.
10. Both modules should power up - the Power and Link LEDs should light on
both modules
