background image

www.hydraconnect.com

(

 720-583-4364

HydraConnect LLC

Safety Information

Please read and understand all instructions in this manual before operating this 

equipment.

 

¾

Keep these instructions in a safe, accessible place for future reference.

 

¾

Pay attention to all warnings, and follow all instructions.  If the equipment 

is used in a manner not specified by the manufacturer, the protection pro-

vided by the equipment may be impaired.

 

¾

Do not use this equipment near water, and unplug the product before clean-

ing and clean only with a dry cloth.

 

¾

Do not install near any heat sources such as heat registers, stoves, or other 

equipment that produce heat.

 

¾

Explanation of graphical symbols:

Exclamation point symbol: the exclamation point within an  

equilateral triangle symbol is intended to alert the user to the  

presence of important operating and maintenance instructions in 

the literature accompanying the product.

 

¾

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE AND 

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE 

PLACED ON THIS EQUIPMENT.

 

¾

Do not block the air ventilation openings. Only mount the equipment per 

HydraConnect’s instructions.

 

¾

Ensure that all IR connections are made 

BEFORE

 power is applied to either 

module.  Failure to observe this requirement may result in damage to the 

modules that will not be covered under warranty.

 

¾

NOTE, This equipment has been tested and found to comply with the lim-

its for a Class B digital device, pursuant to Part 15 of the FCC rules. These 

limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can 

radiate radio accordance with the instructions, may cause harmful interfer-

ence to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to 

try and correct the interference by one or more of the following measures:

• 

Reorient or relocate the receiving antenna

• 

Increase the separation between the equipment and the receiver

• 

Connect the equipment into a outlet on a circuit different from that to 

which the receiver is connected

• 

Consult the dealer or an experienced radio/TV technician for help

Page 1

Содержание HEXT-21b












Отзывы: