HYDRA-PULL HP 500, Руководство по эксплуатации и запасным частям

Страница: 18 / 77

CONTROLS
18
Operation Manual
CONTROLS
OPERATING THE BEATER
To start beater, engage PTO lever slowly, at low engine rpm.
To stop beater, disengage PTO. (See your tractor’s Operator’s Manual)
For best spreading results, operate the tractor engine at “PTO RATED” speed.
WARNING: Do not operate the apron chain without running the beaters as this may damage the
spreader.
OPERATING THE ENDGATE
IMPORTANT: Contact of apron chain running
with endgate closed will cause damage. To avoid
contact with apron chain when running, endgate
must be raised when running apron chain.
Operate the endgate with the second auxiliary control valve
lever.
OPERATING APRON CHAIN
To run apron chain lock hydraulic control lever in
operating position on tractor.
See your tractor’s operating manual for information
on how to control flow rates of your hydraulic system.
Maximum hydraulic oil flow through the spreader apron
chain motor is 15 gpm. Trying to force through more oil
than this may cause serious damage to motor
(relief factory set at 1250 psi)