1. General
1.1 It is important these Installation and Maintenance Instructions are fully
adhered to.
1.2 Full details of the unit supplied are shown on the product nameplate. If in
doubt about any detail contact Hydor or its agents for clarification.
1.3 All electrical installation must be carried out by suitably qualified and
competent personnel in accordance with all current statutory
requirements.
1.4 These instructions cover only the Hydor product and do not include
the supply or installation of any safety equipment that may be required
e.g. adequate guarding or protection from rotating parts and proper
electrical isolation.
1.5 Any declarations made by Hydor about product installation and safety,
are dependent on the fan equipment being used within installations which
themselves meet the requirements of the relevant Standards and
Directives of your region.
1.6 The fan is designed for use in an ambient temperature of -20°C up to a
maximum of +70°C, speed controlled operating
temperatures of -20°C and +50°C and up to 95% relative humidity. EC fans
are designed for ambient temperatures up to +60°C. The fan is not
suitable for corrosive or explosive atmospheres.
1.7 The installer should provide easy access to the fan to facilitate future
maintenance.
1.8 The installer should ensure the fan is adequately supported.
1.9 This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the product by a person responsible for their safety.
Children should be supervised to ensure that they do not play with
the product.
1.10 At end-of-life, the unit must be disposed of in an environmentally friendly
manner by suitably qualified and competent personnel in accordance with
the requirements of applicable Standards and Directives.
2. Installation
WARNING:
The fan must be isolated from the power supply during
installation and maintenance. The fan must be earthed in accordance
with the local regulations.
2.1 Upon receipt, the fan equipment should be visually inspected to check for
any damage. Ensure that the impeller is free to rotate.
2.2 If there are any queries concerning the fan equipment, Hydor should be
contacted prior to the installation.
2.3 The fan must be securely mounted in the desired position to suit the
