SMU1000
General Safety Precautions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 8 / 48
BeWa SMU1000 34x 3614430a en-us 2012-03-13.doc
2012-03-13
General Safety Precautions
These operating instructions contain the key instructions for properly and safely
operating the SMU.
Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the
SMU is knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular,
are to be adhered by all those who work with the SMU.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the SMU.
The SMU has been designed and constructed in accordance with the current
state of the art and recognized safety regulations. Nevertheless, hazards may be
posed to the life and limb of the individual using the product or to third parties.
Risk of damage may be posed to the product or other equipment and property.
The SMU is only to be used as follows:
solely for its designated use
only when in a safe, perfect condition
Any faults or malfunctions which might impair safety are to be properly repaired
or remedied immediately.
Our General Terms and Conditions (AGB) apply. They are made available to the
owner upon concluding purchase of the unit at the latest. Any and all warranty
and liability claims for personal injuries and damage to property shall be
excluded in the event they are attributable to one or more of the following
causes:
improper use of the SMU or use deviating from its designated use
improper assembly, installation, commissioning, operation and maintenance
of the SMU
Modifications to the SMU made by the user or purchaser
improperly performed repair work