FT 5
General Safety Precautions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 8 / 44
Bewa FT5 3160334d en-us 2012-03-14.doc
2012-03-14
General Safety Precautions
These operating instructions contain the key instructions for properly and safely
operating the FT5.
Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the FT5 is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are to
be adhered by all those who work with the FT5.
Adherence is to be maintained to pertinent accident prevention regulations applicable
at the site where the product is used.
The safety precautions listed herein are limited solely to using the FT5.
The FT5 has been designed and constructed in accordance with the technical state of
the art and recognized safety rules and regulations. Nevertheless, hazards may be
posed to the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
Use the FT5:
solely for its designated use
only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. They are made available to the owner upon
concluding purchase of the unit at the latest. Any and all warranty and liability claims
for personal injuries and damage to property shall be excluded in the event they are
attributable to one or more of the following causes:
Improper use or use deviating from intended use
Improper assembly/installation, start up, operation and maintenance
Operation when the system equipment or systems are defective
modifications to the FT5 made by the user or purchaser
Improper monitoring of unit components that are subject to wear and tear
improperly performed repair work
