FT 5
Performing maintenance
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 34 / 44
7. Press the new filter element down into
the filter mount by turning it slightly.
Do not use striking tools for this.
8. Check the O-ring on the cover for
damage and replace it if necessary.
Lightly wet the O-ring on the cover
with medium.
9. Put the cover on.
Observe correct placement of the
O-ring on the cover while doing so. It
must not be damaged.
10. Fold the four screws up and turn them
clockwise evenly crosswise.
Bewa FT5 3160334d en-us 2012-03-14.doc
2012-03-14