FluidAqua Mobil - FAM 10
Safety Information and Instructions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 9 / 72
BEWA FAM10 3102456f en-us 2012-03-13.doc
2012-03-13
Safety Information and Instructions
These operating and maintenance instructions contain the key instructions for
properly and safely operating the FluidAqua Mobil.
The safety of the FAM largely depends on maintenance. Regular required
maintenance is described in this manual. We will support you if the unit needs repair
and will provide original spare parts.
Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the FAM is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the FluidAqua Mobil.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the FluidAqua Mobile.
The FluidAqua Mobil has been designed and constructed in accordance with the
current state of the art and recognized safety regulations. Nevertheless, hazards
may be posed to the life and limb of the individual using the product or to third
parties. Risk of damage may be posed to the product or other equipment and
property.
The FluidAqua Mobil is to be used:
solely for its designated use
only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. They are made available to the owner
upon concluding purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
Improper use of the FluidAqua Mobil or use deviating from its intended use
Improper start up, operation and maintenance of the FluidAqua Mobil
Operating the FluidAqua Mobil when the safety systems are defective
Modifications to the FluidAqua Mobil made by the user or purchaser
Improper monitoring of unit components that are subject to wear and tear
improperly performed repair work