HYDAC International FMM-P-L, Инструкция по установке и обслуживанию

Страница: 14 / 28

FluidMonitoring Module FMM Features
HYDAC FILTER SYSTEMS GMBH en Page 14 / 28
MoWa FMM-P-L 3493215 en 2010-03-09.doc 2010-03-09
FMM Features
The FluidMonitoring Module FMM-P-L Series combines HYDAC's Condition
Monitoring Products ContaminationSensor CS 1000 and AquaSensor AS 1000 in
one system.
The FMM is used as a robust and stationary system for online measurement of solid
particle contamination and water content in hydraulic and lubricant fluids (e.g. for the
detection of leakages).
The FMM features all of the requisite connectors / adapters, enabling it to be easily
connected to existing hydraulic circuits.
The FMM is suitable for the following operating pressures:
FMM with pressure accumulator 15 … 250 bar
FMM without pressure accumulator 15 … 300 bar
Advantages offered by the FMM:

Cost-effective solution

Early warning of critical machine states

Continuous fluid monitoring

Condition-based maintenance planning