HYDAC FILTER SYSTEMS OFU-10-P-2-N-2-B-05-B/-, Инструкция по эксплуатации и техническому обслуживанию

Страница: 29 / 56

Unit setup/connection
OFU-ATEX en(us) Page 29 / 56
BeWa OFU-ATEX 3838730 en(us) 2013-05-16 2013-05-16
Hanging/connecting the suction hose
NOTICE
Severe contamination
The unit will be damaged
►
Do not prime directly at the bottom of the tank
►
Do not prime in the sump
►
Never prime without a built-in suction screen
The greatest contamination is found on the bottom of the tank.
All impurities and other particles are deposited on the bottom of
the tank.
Put the suction hose, without tension or twist, into the appropriate tank and
secure it against falling out.
Hanging/connecting the pressure hose
Put the pressure hose, without tension or twist, into the appropriate tank and
secure it against falling out.
To avoid air from entering the medium, make sure that the
pressure hose is always below the oil level in operation.