Replacing the Logo! of the TDE module
FAM 5
en-US
Page 4 / 12
MOWA LogoTDE 4359963 en 2018-05-23.docx
2018-05-08
NOTICE
Unit in a condensation state
Risk of a short circuit
►
Do not switch on the Logo! of the TDE module when it is in a
condensation state.
►
Allow it to come to room temperature before commissioning it.
►
While doing so, do not expose the Logo! of the TDE module to any
direct heat radiation from heating devices.
If the unit is exposed to, or has been exposed to, climatic fluctuations
(temperature fluctuations, humidity), moisture can condense on or inside the
unit (unit in a condensation state).
If there is condensation in or on the unit or if the unit has been exposed to
temperature fluctuations, allow it to come to to room temperature before
starting it up.
Preparing the Logo! of the TDE module
In order to disassemble the Logo! of the TDE module, proceed as follows:
1. Switch off the E-Box via the main
switch.
