Unpacking the FMM
FMM-P-L
en(us)
Page 13 / 32
MoWa FMM-P-L 3874982a en-us 2014-12-12.doc
2014-12-12
Unpacking the FMM
Before delivery, the FMM is inspected for leaks and proper functioning at the
factory, then carefully packed for shipment.
When receiving and unpacking the module, check it for damage in transit.
Dispose of the packaging material in an environmentally friendly manner.
Storing the FMM
Store the FMM in a clean, dry place, in the original packing if possible. Do not
remove the packing until you are ready to install the unit.
Always store the FMM in a horizontal or vertical position on the block, without
its original packaging.
Drain the FMM completely before putting it into storage. If necessary, rinse
the FMM with n-heptane to prevent it from gumming up during storage.
Decoding the model code label
For product identification details see the Model code label. This is located on
the back of the unit and contains the exact product description and the serial
number.
Row
-> Description
Model
-> Model code; for details, see page 29.
P/N
-> Part no.
S/N
-> Serial-no.
Date
-> Year/week of production and hardware index
