HYDAC FILTER SYSTEMS CMP 43x0-5 Series, Инструкция по установке и обслуживанию

Страница: 36 / 60

4 | Assembly, installation and commissioning HYDAC FILTER SYSTEMS GMBH
36 / 60 MoWa CMP43x0-5 4191543c en-us print
4.2 Making the electrical connections
Check the connection voltage and the frequency of the electric
motor and balance it with the available mains supply. You will
find the electric data on the name plate of the electric motor.
Install a motor protection switch matched to the nominal
current of the electric motor.
DANGER
Electric voltage warning
Danger of fatal injury
u
In case of any damage to the insulation, switch off the
supply voltage immediately and arrange for repairs to be
carried out.
u
Before carrying out any work on the electrical system and
before any maintenance, cleaning or repair work,
disconnect the supply line or pull out the power plug.
u Never bypass the fuses or disable them.
u Keep moisture away from live parts.
MetallicContamination Sensor MCS1000 to be
electrically connected
For details, see operating instructions of
MetallicContamination Sensor.
Setting up the electrical connection of the AquaSensor
AS1000
For details, see operating instructions of AquaSensors.
HYDACLab HLB1400 to be electrically connected
For details, see operating instructions of HYDACLab sensor.
1
2
3
4
5
6
7
8
A