14
ETS 4100S IO-Link
Edition: 2020-07-20
HYDAC ELECTRONIC GMBH
Part No.: 670032
E
Resettable operating times (Index 257):
Operating times since reset. Reset using
standard command 171.
o
Operating hours (Subindex 1):
Operating times in h
Resettable operating time counter (Index 259):
Operating time counter since reset.
Reset using standard command 171.
o
Number of Q1 (Subindex 1):
Number of switching cycles at output Q1
o
Number of Q2 (Subindex 1) : Number of switching cycles at output Q2 (option
for the device variant with an additional switching output at PIN 2 only.)
Life-long pressure
(Index 272):
Temperature values (before low-pass filter, see
Index 132) since delivery, i.e. over the whole life cycle of the device.
o
Average value (Subindex 1):
Average temperature value in °C with 1 decimal place.
o
Minimum measured value (Subindex 2):
Minimum temperature value in °C with 1 decimal place.
o
Maximum measured value (Subindex 3):
Maximum temperature value in °C with 1 decimal place.
Resettable temperature (Index 273): Temperature values (before low-pass filter, see
Index 132) since reset. Reset using standard command 172.
o
Average value (Subindex 1):
Average temperature value (filtered) in °C with 1decimal place.
o
Minimum measured value (Subindex 2):
Minimum temperature value (filtered) in °C with 1 decimal place.
o
Maximum measured value (Subindex 3):
Maxmum temperature value (filtered) in °C with 1 decimal place.
Lifelong temperature counter (Index 274):
Temperature counter from delivery on,
i.e. over the device's entire life cycle
o
Number of shortfalls (Subindex 1):
Temperature value below the lowest nominal measuring range limit.
o
Number of overruns (Subindex 2):
Temperature value beyond the upper nominal measuring range limit.
o
Number of overloads (Subindex 3):
Temperature value beyond the overload range limit.
o
Number of measuring faults (Subindex 4):
Measuring fault temperature
Resettable temperature counter (Index 275):
Temperature counter since reset. Reset using standard command 172.
o
Number of shortfalls (Subindex 1):
Temperature value below the lowest nominal measuring range limit.
o
Number of overruns (Subindex 2):
Temperature value beyond the upper nominal measuring range limit.
o
Number of overloads (Subindex 3):
Temperature value beyond the overload range limit.
o
Number of SSC1 (Subindex 4):
Number of switching cycles at output SSC1
o
Number of SSC2 (Subindex 5):
Number of switching cycles at output SSC2
