HYDAC ELECTRONIC EDS 3000, Руководство по эксплуатации

Страница: 50 / 83

8 EDS 3000 IO-Link
Edition: 20.04.2020
HYDAC ELECTRONIC GMBH
Part no.: 669897
4.5 Organisational measures

The user manual must always be kept accessible at the place of use of the
measuring system.
 In addition to the user manual, generally applicable legal and other binding accident
prevention and environmental protection regulations must be paid attention to and
must be mediated.
 The respective applicable national, local and system-specific provisions and
requirements must be paid attention to and mediated.
 It is mandatory for the operator to inform personnel on special operating features and
requirements.
 The personnel instructed to work with the measuring system must have read and
understood the user manual, especially the
chapter 4 Security
, prior to commencing
work.
 The nameplates and any prohibition or instruction symbols applied on the measuring
system must always be maintained in a legible state.
 Repairs may only be undertaken by the manufacturer or a facility or person
authorized by the manufacturer.
5 Functions of the EDS 3000
Depending on the model, the instrument has the following functions:
 IO-Link specifications V1.1 and V1.0 are supported.
 Supports SIO mode

Display of the switching states in SIO mode
 Mode display (SIO or SDCI)
 Adaptation to the corresponding application using specific parameter settings
 Display of the actual pressure in
psi, MPa, bar
 Display of the maximum value or of a pre-set switch point.

Switching of the switching outputs in accordance with the pressure and the pre-set
switching parameters
 Analogue output
6 Installation
6.1 General installation notes
The electronic pressure switch EDS 3000 can be mounted directly via the pressure
connection or indirectly on a hydraulic block using a hose or a minimess line (for
tightening torque, see
chapter 19
-
Technical details
).
To ensure optimum positioning, the unit can be rotated 340° about its long axis, and the
display and key pad can be rotated through 270°.
The electrical connection must be carried out by a qualified electrician according to the
relevant regulations of the country concerned (VDE 0100 in Germany). The pressure
switch housing must be earthed correctly at the same time. When fitted into a hydraulic
block, earthing the block via the hydraulic system is sufficient. When installing using a
Minimess hose, the housing must be earthed separately (e.g. with a screened cable).