5
5. Starting Instructions
Please observe the starting instructions on the front of the powerpack.
Start:
•
•
•
•
Check engine oil level
•
Check hydraulic oil level at sight glass
•
Connect hoses and tool
•
Switch fuel tap to “ON”
•
Activate choke
•
Turn ignition switch to “1”
•
Pull recoil starter
•
Deactivate choke
•
Move the lever to “ON”
•
If the oil is cold, you should let the powerpack run for a couple of
minutes before connecting the tool.
Stop
•
•
•
•
Move the lever to “OFF“
•
Turn off the ignition switch
•
Turn the fuel tap to “OFF”
Powerpack with adjustable flow:
The desired oil flow can be set on the front of the
powerpack. A marking is engraved in the lever.
Turn the lever to the right until the marking is
opposite the required flow
The pressure relief valve setting will be the same
on all flows.
