12
Tighten the four screws. Mount the bypass hose on the filter housing. Mount the other end
of the bypass hose on the valve block. Lift the drive unit into the frame, and place the drive
unit on the two rubber dampers. Tighten the four screws with washers (at one side it is
easier to tighten the screws after dismounting the wheel). Add Loctite 638 to the thread on
the supporting leg, and screw together the supporting leg and the rubber damper. Mount the
rubber damper on the frame with a screw and washer from below. Mount the suction hose
on the tank. Mount the return hose on the filter housing.
Mount the hydraulic hose from the pump on the left fitting on the valve block.
