3
Inspection or cleaning of the breaker, change of tool or disconnection of hoses
may never be done while the breaker is connected to the powerpack, as uninten-
tional activation of the breaker can cause severe damage.
Always connect hoses to the breaker before starting the powerpack. Be sure that
all couplings are tight.
The breaker may not be operated if the oil temperature is above 70 C°. Operation
at higher temperatures may result in the breaker getting warmer than normal and
the operator risks getting burnt on it.
To avoid all personal injury and damage to material, all repair, maintenance and
service work must be carried out by authorized or properly trained persons only.
A breaker not in use should always be kept in a safe and dry place.
Try not to do a job with a breaker which is too small for the job.
Keep the tool sharp for maximum breaker performance. Make sure that the tool is
sharp-pointed and not round.
The breaker may never be operated without tool, or without being held against
the working surface, as this may result in overload of the breaker.
Always make sure that the breaker labels and warning signs are legible.
Always use hoses, couplings and spares as such recommend by HYCON A/S.
Repairs may only be carried out by experienced personnel.
Make sure that all couplings are cleaned before connection.
Always disconnect the hydraulic circuit before connecting or disconnecting the
breaker. If this is not done, there is a risk of damage to the quick release coup-
lings or the hydraulic system getting superheated.
IMPORTANT
GTIGT
