3
•
Inspection or cleaning of the breaker, change of tool or disconnection of hoses
may never be done while the breaker is connected to the powerpack, as uninten-
tional activation of the breaker can cause severe damage.
•
Always connect hoses to the breaker before starting the powerpack. Be sure that
all couplings are tight.
•
The breaker may not be operated if the oil temperature is above 70 C°. Operation
at higher temperatures may result in the breaker getting warmer than normal and
the operator risks getting burnt on it.
•
To avoid all personal injury and damage to material, all repair, maintenance and
service work must be carried out by authorized or properly trained persons only.
•
A breaker not in use should always be kept in a safe and dry place.
•
Try not to do a job with a breaker which is too small for the job.
•
Keep the tool sharp for maximum breaker performance. Make sure that the tool is
sharp-pointed and not round.
•
The breaker may never be operated without tool, or without being held against
the working surface, as this may result in overload of the breaker.
•
Always make sure that the breaker labels and warning signs are legible.
•
Always use hoses, couplings and spares as such recommend by HYCON A/S.
•
Repairs may only be carried out by experienced personnel.
•
Make sure that all couplings are cleaned before connection.
•
Always disconnect the hydraulic circuit before connecting or disconnecting the
breaker. If this is not done, there is a risk of damage to the quick release coup-
lings or the hydraulic system getting superheated.
IMPORTANT
GTIGT
