14
For mounting the steel frame you need two steel bars (HYCON special tool No.
9992079) to be inserted in the pipes. Pull the pipes away from each other and push
in the steel frame in between. Push the frame a little into the plastic cover, pull out
the steel bars, and then push the frame completely into the cover. Again use the
steel bars to catch the pipes inside the plastic cover, and push out the two pipes
through the steel frame.
Add Loctite 243 to the four threads and mount the motor plate. Tighten the screws
with a torque of 20 Nm. Place the motor on the motor plate and tighten the nuts on
the elbow fittings by hand. Mount the two screws with lock nuts through the motor
plate and the motor. Tighten the screws with a torque of 20 Nm.
