4. PLUMBING CONNECTIONS
Step 1 - Tank Positioning
Allow 20mm space around the tank to walls for cooling air circulation.
Position the tank vertically beneath the tap in a position such that the flexible hoses
can comfortably reach the tap and water supply.
ENSURE THE FLEXIBLE HOSES DO NOT TWIST OR KINK.
Step 2 - Tap Installation
Determine a convenient location to mount the tap. This can be an existing hole in the
sink top (if the sink is particularly thin the large black washer may be needed. The
washer should be placed on the underside of the sink.), or you may choose to drill
another hole (32mm diameter) either through the sink or the counter top.
The tap can be installed on to sink/counter top that is up to 50mm thick.
Place the tap into the hole ensuring the o ring is correctly seated in the
groove on the base of the tap.
While holding the base of the tap, tighten the clamping nut using a basin spanner.
This process is illustrated below.
6
ZEN_Layout 1 30/12/2014 09:06 Page 6
