2. IMPORTANT SAFETY POINTS
ALWAYS SWITCH OFF THE MAINS BEFORE COMMENCING
INSTALLATION.
ONLY CONNECT THE HEATER TO A SINGLE PHASE SUPPLY WITH
A MAINS VOLTAGE AS SPECIFIED ON THE RATING LABEL.
THE SUPPLY CORD CANNOT BE REPLACED BY THE USER. IF THE
CORD IS DAMAGED THE APPLIANCE SHOULD BE RETURNED TO
THE MANUFACTURER OR AN AUTHORISED SERVICE AGENT FOR
REPLACEMENT.
THE HOSES AND PIPES SUPPLYING THIS HEATER MUST NOT COME IN
CONTACT WITH ANY FIXED WIRING OR THE SUPPLY CHORD.
DO NOT CARRY THE APPLIANCE BY THE POWER CORD.
AN RCD CIRCUIT BREAKER IS STRONGLY RECOMMENDED.
THIS UNIT DISPENSES BOILING WATER.
THE TANK UNIT MUST BE PLACED ON A SOLID SURFACE WHERE IT
WILL NOT BE KNOCKED OVER CAUSING DAMAGE TO THE WATER
HOSES OR ELECTRICAL CONNECTIONS.
THE HEATER MUST NOT BE USED IN AN AREA SUBJECT TO FLAMMABLE
VAPOURS SUCH AS PAINT, SOLVENT OR PETROL.
THIS PRODUCT IS NOT SUITABLE FOR OUTDOOR USE OR USE IN
DAMP CONDITIONS.
DO NOT USE IN AMBIENT TEMPERATURES EXCEEDING 30°C.
ALLOW 20MM SPACE AROUND THE TANK TO WALLS FOR COOLING
AIR CIRCULATION.
THE HEATER MUST BE FITTED WITH A RELIEF VALVE.
THE RELIEF VALVE MUST BE TESTED REGULARLY TO REMOVE SCALE
DEPOSITS.
3
ZEN_Layout 1 30/12/2014 09:06 Page 3
