2
Thank you for purchasing a Hyco Speedflow unvented water heater.
The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops,
student accommodation and domestic premises which have been extended
and there is no central hot water system nearby. One unit located under
the kitchen sink is often used to supply hot water for light dishwashing in
the kitchen sink and hand washing in the cloakroom basin. Please read and
understand these instructions before commencing installation and leave
them with the user when installation is complete.
1. Important safety points
Important information is contained within this instruction manual, read and understand
the safety guidance and warnings before undertaking installation, operation or maintenance
of the appliance. Ensure they are left with the user upon completion of installation.
Electrical installation must be carried out by a qualified electrician in accordance
with the latest edition of the IEE wiring regulations.
The appliance must be earthed.
The product should only be connected to an electrical supply that meets the
specifications detailed on the rating label.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid hazard.
The appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
The supplied safety relief device must be fitted in all circumstances, ensure there
are no obstructions in the plumbing between it and the appliance.
The safety relief device will operate if it encounters an over pressure event,
ensure it can discharge to a safe visible place, open to the atmosphere, that will
not cause harm to people or the surroundings.
Turn off the appliance immediately if the water supply is suspected to be frozen.
Consider reducing the risk by lagging pipework if exposed to cold environments.
