Air speed adjustment
1. switch off the power, loosen the cover
screws and remove the cover.
2. Use small Philips head screwdriver or
plastic flat blade probe to turn VR shaft.
Clock-wise (CW) to increase power to
maximum (+) ,
turn tool gently (CCW) to reduce power as
required (-) .
Heater Element Switch on/off
1. switch off the power, loosen the cover
screws and remove the cover.
2. Adjust the heater switch on the PCB with a
small plastic or wood flat blade probe.
•
Slide the switch to ‘ON’ : Enables heater on.
•
Slide the switch to ‘1’ : Disables heater.
Sensor range adjustment
1. The range is 4” to 10” (100mm to 250mm),
standard setting is 6” (170mm + 20mm)
2. Clockwise: Increases the sensing
range (+) .
3. Counterclockwise: Decreases the
sensing range (-) .
4. DO NOT OVERTURN.
5
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
216mm
276mm
100mm
Hand
Dryer
ON
VR.FOR AIR SPEED
SW.FOR HEATER
VR.FOR SENSOR
