Hyco JETS10W Jetstream Slimline Скачать руководство пользователя страница 12

hyco.co.uk 

Hyco Manufacturing Ltd
Normandy Court 
Express Way
Castleford, WF10 5NR

T  01924 225 200
F  01924 225 210
E  [email protected]

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE

EUROPEAN DIRECTIVE 2002/96/E.

At  the  end  of  its  working  life  this  equipment  must  not  be  disposed  of  as  household
waste.  It  must  be  taken  to  a  local  authority  waste  collection  centre  or  to  a  dealer
providing  this  service.  Disposing  of  electrical  and  electronic  equipment  separately
enables its components to be recovered and recycled to obtain significant savings in
energy  and  resources.  In  order  to  underline  the  duty  to  dispose  of  this  equipment
separately, the product is marked with a crossed out dustbin.

7. Guarantee and service policy

This product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.

Содержание JETS10W Jetstream Slimline













Отзывы: