The unit’s surface temperature may reach up to 85
℃
. DO NOT touch the housing
bare-handed during its operation. Allow about 15 minutes for cooling the unit
down before replacing bulb or maintenance as it could be very hot.
Avoid any flammable liquids, water or metal objects entering the unit. If this
happens, cut of
the main power supply immediately.
DO NOT operate in a dirty or dusty environments . Clean fixtures regularly.
DO NOT touch any wire during operation as there might be a hazard of electric shock.
Do NOT let cables twist together.
The minimum distance between light output and the illuminated surface must be
more than 12 meters.
Disconnect the main power supply before fuse replacement or servicing.
In the event of a serious operating problem, stop using the unit immediately.
DO NOT open the unit as there are no user serviceable parts inside.
Never try to repair the unit by yourself. Repairs carried out by unskilled people can
lead to damage or malfunction. Please contact the nearest authorized technical
assistance center if needed.
Disconnect the main power supply if the fixture is has not been used for a long time.
Use the original packing materials when transporting it again.
Cautions:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain
or moisture.
DO NOT look directly at the light while the led is on.
DO NOT turn on the unit when housing is damaged.
Installation:
