Please read the instructions carefully which includes important information about
the installation, usage and maintenance.
Safety Instructions
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems
.
Unpack and check carefully that there is no transportation damage before using the unit.
The unit is for indoor use only. Use only in a dry location.
DO install and operate by qualified operator.
DO NOT allow children to operate the fixture.
Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
Be sure that no ventilation slots are blocked, otherwise the unit will overheat.
Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the unit.
It’s
important to ground the yellow/green conductor to earth in order to avoid electric shock.
The maximum ambient temperature is TA: 40
℃
. DO NOT operate it when the temperature is higher.
DO NOT connect the device to any dimmer pack.
During initial start-up some smoke or a smell may arise. This is a normal process and does not
necessarily mean that the device is defective. It will decrease gradually within 15 minutes.
Make sure there are no flammable materials close to the unit while operating to avoid a fire hazard.
Examine the power wires carefully; replace them immediately if there is any damage.
The
Unit’s surface temperature may reach up to 85
℃
. DO NOT touch the housing bare-handed
during its operation. Allow about 15 minutes for cooling the unit down before replacing bulb or
maintenance as it could be very hot.
Avoid any flammable liquids, water or metal objects entering the unit. If this happens, cut off
