background image

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

 

 

 
Installation Safety Precautions

1.  Never install telephone wiring during a lightning storm. 
2.  Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 
3.  Never touch  un-insulated telephone wires or terminals unless the telephone line has been 

disconnected at the network interface. 

4.  Use caution when installing or modifying telephone lines. 

 

The 

HYBREX

 GDS-1280 utilizes a 3 pin grounding power supply cord.  This cord is not to be attached to 

any building surfaces.  When using your telephone equipment, basic safety precautions should always be followed to reduce 
the risk of fire, electric shock and injury to persons, including the following: 
 
1.  Read and understand all instructions. 
2.  Follow all warnings and instruction marked on the 

product. 

3.  Unplug this product from the wall outlet before 

cleaning.  Do not use liquid cleaners or aerosol 
cleaners.  Use a damp cloth for cleaning. 

4.  Do not use this product near water, for example, near a 

bath tub, wash bowl, kitchen sink, or laundry tub, in a 
wet basement, or near a swimming pool. 

5.  Do not place this product on an unstable cart, stand, or 

table.  The product may fall, causing serious damage 
to the product. 

6.  Slots and openings in the cabinet and the back or 

bottom are provided for ventilation, to protect it from 
overheating, these openings must not be blocked or 
covered.  The openings should never be blocked by 
placing the product on the bed, sofa, rug, or other 
similar surface.  This product should never be placed 
near or over a radiator or heat register.  This product 
should not be placed in a built-in installation unless 
proper ventilation is provided. 

7.  This product should be operated only from the type of 

power source indicated on the marking label.  If you 
are not sure of the type of power supply to your home 
or office, consult your dealer or local power company. 

8.  The socket-outlet shall be installed near the equipment 

and shall be easily accessible. 

9.  This product is equipped with a three wire grounding 

type plug, this plug will only fit into a grounding type 
power outlet.  This is a safety feature.  If you are 
unable to insert the plug into the outlet, contact your 
electrician to replace your obsolete outlet.  Do not 
defeat the safety purpose of the grounding type plug. 

10. Do not allow anything to rest on the power cord.  Do 

not locate this product where the cord will be damaged 
by persons walking on it. 

 

11.  Do not overload wall outlets and extension cords as 

this can result in the risk of fire or electric shock. 

12.  Never push objects of any kind into this product 

through cabinet slots as they may touch dangerous 
voltage points or short out parts that could result in a 
risk of fire or electric shock.  Never spill liquid of any 
kind on the product. 

13.  To reduce the risk of electric shock, do not 

disassemble this product, but take it to a qualified 
service man when some service or repair work is 
required.  Opening or removing covers may expose 
you to dangerous voltages or other risks.  Incorrect 
reassemble can cause electric shock when the 
appliance is subsequently used. 

14.  Unplug this product from the wall outlet and refer 

servicing to qualified service personnel under the 
following conditions: 

A. When the power supply cord or plug is damaged or 

frayed. 

B. If liquid has been spilled into the product. 
C. If the product has been exposed to rain or water. 
D. If the product does not operate normally by 

following the operating instructions.  Adjust only 
those control, that are covered by the operating 
instructions because improper adjustment of other 
controls may result in damage and will often require 
extensive work by a qualified technician to restore 
the product to normal operation. 

E. If the product has been dropped or the cabinet has 

been damaged. 

F. If the product exhibits a distinct change in 

performance. 

15.  Avoid using a telephone (other than a cordless type) 

during an electrical storm.  There may be a remote 
risk of electric shock from lightning. 

16.  Do not use the telephone to report a gas leak in the 

vicinity of the leak.

 
 
 

------------------------------------------------------- 

SAVE THESE INSTRUCTIONS 

 

 
 
 

 

 

Содержание GDS-1280N



































Отзывы: