- 1 -
Backup Parking Sensor System
Wireless Digital Display with Built-in Audible Alert
For Buses, RV's, Commercial Trucks, and Long Vehicles
MODEL C-2682-04
Included in the Box
¾
4x Black Sensors
with bracket, attached cable
and BNC type connector. Cable Length: 26ft (8m)
¾
1x Main Control Box
with double-sided
self-adhesive and Velcro attachment. Two screw
holes on each side of the box
¾
1x Wireless Digital Distance Display
with
adjustable and removable bracket with
double-sided self-adhesive on bottom of the
bracket base
¾
1x Power Cable for Wireless Digital Distance
Display
with 3-pin mini plug. 5ft (1.5m) long
¾
1x Power Cable for Main Control Box
with BNC
type connector. 5ft (1.5m) long
¾
10x 1-1/4" screws with nuts
for mounting the
sensors and Main Control Box
¾
1x User
’
s Manual
Features
¾
Wide Working Voltage Range (DC 12-24V)
¾
System works when vehicle is in reverse.
¾
4 Under-Bumper Heavy Duty Sensors with bracket
for easy under-bumper installation
¾
Waterproof Main Control Box for easy
under-vehicle installation
¾
Wireless Digital Distance Display with built-in
audible alert, volume control (Off/Low/High), and
adjustable/removable bracket
¾
All Connectors - Waterproof BNC type
¾
Distance Display in feet or meters
¾
3 LED Lights (Green/Yellow/Red) on each side of
distance display indicating orientation of obstacles
and Safe/Warning/Stop zone.
¾
Specially designed for long vehicles such as Buses,
Recreational Vehicles, and Commercial Trucks.
¾
12 Month Warranty
Specifications
¾
CE and ISO9001 Approved
¾
Wireless Display RF Range: 65ft (20m)
¾
Operating Voltage: DC 12V ~ 24V
¾
Detecting Range: 1.0 ~ 8.2ft (0.3m ~ 2.5m)
Displayed as 0.0 when less than 1ft (0.3m)
¾
Measuring Error:
±
0.3ft (0.1m)
¾
Sensor Detection Angle: 90
°
¾
Detection Response Time: 300ms
¾
Audible Alert when obstacle within: 1.0~8.2ft (0.3m
~ 2.5m)
¾
Distance Display: in feet or meters
¾
Ultrasonic Frequency: 40Khz
¾
RF Frequency: 433KHz
¾
Audible Alert Volume: 60 db
¾
Maximum Power Consumption: 4W
¾
Current Consumption: 100~300mA
¾
Operating Temperature Range: -30 ~ +70
°
C
¾
Sensor Cable Length: 26ft (8m)
¾
Power Cable for Wireless Display: 5ft (1.5m)
¾
Power Cable for Main Control Box: 5ft (1.5m)
¾
Dimensions of the Wireless Display without Bracket:
Width x Depth x Height = 3" x 3.1" x 1.2" (7.6cm x
7.9cm x 3.0cm)
¾
Height of Display Bracket: 0.75" (1.9cm) Bracket
adjustable/removable from the display
¾
Dimensions of the Main Control Box: Width x Depth x
Height = 4.0" x 4.3" x 1.1" (10.2cm x 10.9cm x
2.7cm)
Note:
The specifications are for reference only. They may be changed without prior notice.
Tools Needed
1/8
”
drill bit, drill, tape measure, chalk or marker, wire stripper, vinyl electrical tape, cable/wire ties, voltage meter,
screw driver set, pliers
