Hy-Gain 670B Hy-Range I, Инструкция по эксплуатации

Страница: 6 / 13

In the case of positive ground vehicles, the black lead should be
connected to the accessory post on the ignition switch, the voltage
regulator side of the ammeter or the accessory side of the fuse block.
The red lead should be connected to the metal firewall or any other
point that is connected to the vehicle chassis (ground).
Antenna Connection
The antenna should be connected to the transceiver by means of
coaxial cable. Either RG-58/u or RG-8/u coaxial cable may be used.
The cable should be terminated with a PL-259 coaxial connector.
Screw the PL-259 coaxial connector onto the antenna jack.
Caution
Do not try to transm it without an antenna connected to the trans-
ceiver.
External Speaker (EXT. SP.) Jack
This jack can be used with any 8-ohm earphone or speaker. Inserting
a 3.5 mm plug into the jack automatically silences the internal speaker.
Remote Speaker Jack
This will be used to control the built-in speaker when operating the
transceiver with the optional telephone handset connected.