Installing the Antenna
Refer to the mounting details in Figure 4 and 5 to install the completely assembled
antenna.
Figure 5
Antenna Installation
First mount the completed antenna on your mast (not supplied) as shown in Figure 5. Use
the two U-bolts, 5/16" nuts and 5/16" lock washers (Items Nos. 29, 31 and 30). Use three
(3) 1/4"-20 x 3/4" bolts, nuts and lock washers (Item No’s 24, 27 & 26) to attach the
insulator to the upper end of the mounting bracket.
If you are roof mounting your antenna, use four (4) sets of 1/4"-20 hardware for the
preceding step. Before tightening them, attach two adjacent radials to each set of
hardware as shown in Figures 3 and 5. If desired, you may use the four, 33 foot radial
system shown.
