3.2 | PRE-DELIVERY / FREQUENT / ANNUAL INSPECTION CHECKLIST
SECTION 3 | MAINTENANCE CHECKLISTS
Model:
Serial Number:
• Check each item listed below.
• Use proper operating, service, and maintenance manual for specifi c information and settings
• If an item is found to be unacceptable make the necessary repairs and check the “repaired” box.
• When all items are “acceptable”, the unit is ready for service.
• If an item is found to be unacceptable, make the necessary repairs and check the “repaired” box. When all
items are “acceptable,” the unit is ready for service.
Y — Yes/Acceptable N — No/Unacceptable R — Repaired
Date:
Inspected by:
AERIAL PLATFORMS SHALL BE INSPECTED, SERVICED, AND ADJUSTED TO
MANUFACTURER’S REQUIREMENTS BY A QUALIFIED MECHANIC PRIOR TO
EACH SALE, LEASE, OR RENTAL, AND EVERY 3 MONTHS OR 150 HOURS,
WHICHEVER COMES FIRST, AND ANNUALLY.
BASE:
Y N R PLATFORM:
Y N
R
Inspect slide tracks for damage
□ □ □
All rails in place/secure
□
□
□
All frame bolts tight
□ □ □
No bent rails
□
□
□
Pump Secure
□ □ □
No broken welds
□
□
□
DC motor secure
□ □ □
Platform power outlet safe/working (if installed)
□
□
□
Battery Hold Downs Secure
□ □ □
Entrance gate closes freely
□
□
□
Batteries Fully Charged
□ □ □
Cables in place/secure
□
□
□
Counterweights secured
□ □ □
Functions:
Wheels: Grease casters
□ □ □
Elevate/Lower Operational
□
□
□
Wheels: Bolts/Nuts Tight
□ □ □
Master Power Switch Breaks Circuits
□
□
□
Maintenance Locks: Pins storage location
□ □ □
Emergency Stop Breaks Circuits
□
□
□
All Shields/Guards in place
□ □ □
Emergency Down Operational
□
□
□
Hydraulic Oil Level
□ □ □
Motion Alarms Functional
□
□
□
Check all hydraulic hoses for leaks
□ □ □
Brakes: Operational
□
□
□
Check all hydraulic fi ttings for leaks
□ □ □
Bubble Level in Place
□
□
□
SCISSORS
When beginning to elevate, overload light and alarm
activate. Then, if not overloaded, allows elevation to
continue, and light and alarm stop.
□
□
□
No Broken Welds
□ □ □
When overloaded, platform stops elevating.
□
□
□
Ret. Rings Secure on Pivots
□ □ □
Check battery Voltage: <12.5V, charge.
□
□
□
No Bent Beam Members
□ □ □
WIRING / OTHER:
All rollers turn freely
□ □ □
Switches secure
□
□
□
DECALS:
Contactor(s) secure
□
□
□
Legibility
□ □ □
Tight on terminals (no loose wiring)
□
□
□
Correct capacity noted
□ □ □
Operator / Service Manual Included
□
□
□
Proper placement quantity
□ □ □
Battery Charger Secure / Operational
□
□
□
COMMENTS:
CAUTION
MAINTENANCE & TROUBLESHOOTING
HB-P827/HB-P1027
SUPO-722
REV B
BY CUSTOM EQUIPMENT LLC
14
