background image

PLAY

RECORD

STOP

SAVE

This drum provides facilities to record one piece of your per-
formance and save it as pattern 51. The recording could be
accompanied with pattern. Before recording, you should pre-
pare necessary settings including selecting drum kit, metro-
nome and tempo setting, pattern selecting etc.

RECORD STANDBY

Press the RECORD button to enter the record mode. The
button will light up and blink to indicate the recorder is
standby. The PATTERN button will light up automatically so
that you can record your performance with a pattern. The
display shows the current pattern number; you can select
another pattern by the + or - button. The volume and tempo
of the pattern is adjustable, please referto the <PATTERN>
section of this manual.
If you do not want drum sound in the pattern, press the DRUM
OFF button to mute it.
If you don

t want to use the pattern at all, press the PAT-

TERN  button, its indicator will be truned off and 

oFF

 will

appear on the display.

You can make the metronome ready by pressing the CLICK
button and the button will flash.

RECORDING

There are two types of the record.
* Record free performance - You should turn off the pattern
for this type of record.
* Record with a pattern - In this way, you can either use its
background music or add your performance to the pattern.
The pattern will play repeatedly until you stop the recording.
Please note that even if you stop the recording before the
pattern is over, the remaining measure of the pattern will be
kept in your recording.

There are two ways to start recording.
* Auto Start: Press the RECORD button again, after four
beats count-in, the record will start immediately no matter
you strike the drum pad or not.
* Synchro Start: The record will start as soon as you strike
any pad.

When record started, the RECORD button stops blinking and
remains lit. The metronome will sound as soon as record
starts if the metronome is engaged.  The recording measure
will appear on the display.

      

Turn off the pattern

      

Enter the record mode

      

Count-in

      

Recording

 Measure

RECORD

16

PLAY

RECORD

STOP

SAVE

PLAY

RECORD

STOP

SAVE

KIT

PATTERN

Содержание HD-005






















Отзывы: