1
Safety
© Copyright
InoFlex
®
VT-S 016 – VT-S 080
Page 1-5
HWR Spanntechnik GmbH
Issue E
EN
1.3
I
NTENDED USE
1.3.1
E
XCLUSIVE USE
The InoFlex
®
power chuck VT-S 016 – VT-S 080 is designed exclusively
for clamping of components for mechanical machining in machine tools
(see also chapter ‘7 – Technical specifications’).
Any use other than the intended use is considered to be improper. The
manufacturer is not liable for resulting damages.
1.3.2
O
BSERVE INSTRUCTIONS AND REGULATIONS
Intended use also includes:
•
observance of all instructions from the documentation as well as the
supplied manufacturer documentation (if applicable) and
•
compliance with the maintenance and service conditions and intervals
prescribed by the manufacturer.
1.3.3
O
BSERVE ACCIDENT PREVENTION REGULATIONS
Observe the relevant accident prevention regulations as well as the other,
generally recognized safety rules.
1.4
W
ARNING AGAINST MISUSE AND ABUSE
Proper functioning of your InoFlex
®
chuck has been tested at the factory.
Nevertheless, misuse or abuse may lead to hazards:
•
to the life and limb of operators, third parties and animals in the vicinity
of the machine tool in which the chuck is inserted,
•
to the machine tool, the chuck and other property of the operator,
•
to the efficient operation of the machine tool in which the chuck is in-
stalled.
