Hwasung HMC-825, Руководство пользователя

Страница: 26 / 65

Title Rev. Page
HMK-825 HMC-825 Ver1.5 P.25/65
SUB+’R’+n
[Name] Set the character outline
[Format] ASCII
SUB b n
Hex 1A 52h n
Decimal 26 82 n
[Range] 0 ≤ n ≤ 1
[Descript] n=0 : cancel outline (border) of character in tetragon
n=1 : Set outilne (border) of charcater in tetragon
[Caution] the horizontal extension is valid as extended as eight times
the vertical extension is valid as extended as two times
SUB+’s’+n
[Name]
Set the printing speed
[Format] ASCII SUB s n
Hex 1A 73h n
Decimal 26 82 n
[Range] 1 ≤ n ≤ 10
[Initial Value] n=10
[Descirpt] n=1 : Printing Speed 70mm/s
n=8 : Printing Speed 140mm/s
n=2 : Printing Speed 80mm/s. n=9 : Printing Speed 150mm/s
n=3 : Printing Speed 90mm/s n=10 : Printing Speed 160mm/s
n=4 : Printing Speed 100mm/s n=11 : Printing Speed 170mm/s
n=5 : Printing Speed 110mm/s n=12 : Printing Speed 180mm/s
n=6 : Printing Speed 120mm/s n=13 : Printing Speed 190mm/s
n=7 : Printing Speed 130mm/s n=14 : Printing Speed 200mm/s
n=15 : Printing Speed 210mm/s n=16 : Printing Speed 220mm/s
n=17 : Printing Speed 230mm/s n=18 : Printing Speed 240mm/s
n=19 : Printing Speed 250mm/s
[Caution] Control command density once the low speed makes printing density (be) unclear