HW Group Poseidon2 3468, Руководство пользователя

Страница: 16 / 20

Poseidon2 3468
– Manual
HW group
www.HW-group.com 16
Specifications
ETHERNET
Interface RJ45 (100BASE-Tx)
– 10/100 Mbps network compatible
Supported protocols IP: ARP, TCP/IP (HTTP, NTP, SMTP, netGSM, HWg-PUSH), UDP/IP (SNMP)
SNMP compatibility Ver.1.00 compatible, partial ver.2.0 implementation
Logger
Internal memory 250,000 records in flash memory
Logged items Sensors, DI, DO
SENSORS
Type HWg original accessories: 1-Wire & 1-Wire UNI
Connector 2xRJ11 (1-Wire UNI)
Sensors Up to 8 sensors in total (tempe humidity combo sensors count as 2 sensors)
Sensor distance Up to 60m
DI
– DRY CONTACT INPUTS
Port I1, I2, I3, I4
Type Digital Input (supports NO/NC Dry contact)
Sensitivity 1 (On) = 0
–500 Ω
Max. distance Up to 50m
OUTPUTS
Port / type OUT1, OUT2 / Relay contacts (NC-COM-NO)
Max. load max. 24V / 16A DC; max. 250V / 16A AC
State Power up state (no state restart memory)
POWER input
Type You can power the device from power input 1 or 2.
Power input 1
POWER 9-30V DC
– 2,5W
Jack 9
–30V DC (barrel, inner 2.5 mm outer 6.3 mm) + Terminal Block
Power input 2 Terminal Block 48V DC
POWER output
Voltage
Power input 1 (9-30V): Power Out = Power IN (9-30V)
Power input 2 (48V): Power Out = 12V
Current / Connector Max. 150mA / Terminal Block
LED status indicators
POWER (RJ45 + top) Green
– power OK (top), Ethernet enabled (RJ45)
LINK & Activity (RJ45) Yellow - Ethernet connectivity
Setup / Alarm Red
Inputs Green
Outputs Yellow
DIP SWITCH
DIP1: Setup
OFF = Normal state
Load defaults: Set ON, power-up device, toggle 3 times during first 5 seconds
DIP2: Security
ON = Secure mode (online demo)
– remote configuration disabled
OFF = Non-secure mode
– remote configuration enabled
Physical parameters
Temperature range Operating: -
30 to +75 °C (-22 to 167 °F) / Storage: -35 to +85 °C (-31 to +185 °F)
Dimensions / Mass 145 x 90 x 45 [mm] / 225 g
EMC FCC Part 15, Class B, CE - EN 55022, EN 55024, EN 61000