Poseidon 3268 – starting guide
HW group
Oficjalny dystrybutor:
www.atel.com.pl
45-231 Opole
tel. +48 (77) 455 60 76
ATEL ELECTRONICS
e-mail: [email protected]
ul. Oleska 121
fax. +48 (77) 455 80 56
4) Flash Setup – Detecting sensors
Click the “Flash Setup” link
at the main page to open a
graphic configuration
interface.
Adobe Flash player must
be installed in your web
browser. You can find it on
the supplied CD (
\Poseidon\
install_flash_player_7.msi
), or
download the latest version
from the Internet.
Detecting the sensors
In the “Sensors Setup” tab, click “Autodetect Sensors” in the lower right-hand corner.
Controlling the outputs
In the “General Setup” tab, in the “Output Settings” section in the upper left-hand corner, set an
output value and click “Apply Changes”.
Flash Setup allows you to:
•
Set up sensor names, “safe ranges” for alarms, and alarm
alert destinations
•
Monitor current sensor readings, set a refresh interval
•
Select temperature units (°C, °F, °K)
•
Set current time and specify a NTP server for time
synchronization
•
Set SNMP parameters (Community names & rights), define
targets for SNMP traps
•
Set up alarm alerts via email and test them
•
Set up security features: names and password, IP ranges
For more information about the configuration, see the manual or visit
www.HW-group.com
.
