HW Group HWg-PWR 12, Руководство пользователя

Страница: 10 / 44

HWg-PWR 3 / 12 / 25 MANUAL HW group
September 2013 page 10
Restoring factory defaults

Right-click a device MAC address. Within 60 seconds after powering up the unit,
factory defaults can be restored using UDP Config.

Disconnect power, press the Default switch, power up the device and wait for 10
seconds. Release the switch. The device is ready in the factory default configuration.
3) WWW interface of the device
To open the WWW interface of the device:

Enter the IP address into a web browser

Click the IP address in UDP Config

Click the underlined IP address in UDP
SETUP