8
Figure 1
V. installation and level adjustment
Place the host on a stable platform with no wind flow, as shown in Figure 2,
unscrew the two fixing screws on the back of the instrument, remove the upper top
plate, and install the control magnet, ring frame rod, and platinum as shown in Figure
3. Ring (Platinum ring is inserted into the ring frame rod first, and the outer flame part
of the alcohol lamp is burnt and clean before installation. Note: Do not touch the burnt
and clean platinum ring). Adjust the three machine feet so that the level bubble on the
sample pan is in the center, and finally put the upper top plate back in place and fix it
with screws.
Figure 2
