Hvac specialty Hydro Header 300, Руководство по установке

Страница: 4 / 8

Important Note:
The contents of this manual are intended as guidelines for
licensed professional installers. The manual is not a “do-it-yourself”
guide for the non-professional.
This manual is not intended to take the place of the boiler
manufacturer’s installation manual which should be
carefully followed.
What’s Included:
• B&G 1” EASB 1 Jr Air Separator
• Webstone 1 1/4” Combination Ball Valve and Drain Valve
• B&G NRF-25 Circulator Pumps (mounted to header & pre-wired)
• B&G Check-Trol Isolation Flange
• Zimlet Back-Flow Preventer (shipped loose)
• Bell & Gosset Pressure Reducing Valve (shipped loose)
• Honneywell Switching Relay
• 24” x 16” Plywood Back Board
• 18-2 Thermostat Wire (to connect TT on pump relay to boiler)