Huyndai Venue 2020 Скачать руководство пользователя страница 361

Страница: 361 / 375

Maintenance

8-56

Turn signal lamp

Stop/tail lamp

Type A (Standard)

OQXI079039

Turn signal lamp

Type B (LED)

OQXI079040

5. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on the

assembly.

6. Remove the bulb from the socket

by pressing it in and rotating it

counterclockwise until the tabs on the

bulb align with the slots in the socket.

Pull the bulb out of the socket.

7. Insert a new bulb by inserting it into

the socket and rotating it until it locks

into place.

8. Install the socket into the assembly by

aligning the tabs on the socket with

the slots in the assembly. Push the

socket into the assembly and turn the

socket clockwise.

9. Reinstall the lamp assembly to the

body of the vehicle.

Tail / Stop lamp (Type B)

Your vehicle is equipped with LED lamps.

LED lamps do not have replaceable

bulbs. If the LED lamp does not

operate, have the vehicle checked by an

authorized HYUNDAi dealer.

Side marker

Your vehicle is equipped with LED lamps.

LED lamps do not have replaceable

bulbs. If the LED lamp does not

operate, have the vehicle checked by an

authorized HYUNDAI dealer.

Back up

OQX089037

1. Disconnect the negative battery

cable.

2. Loosen the retaining clips under the

bumper and screws on the wheel

house trim.

3. Pry trim under the bumper toward the

vehicle.

4. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on the

assembly.

5. Remove the bulb by pulling it straight

out.

6. Insert a new bulb in the socket.
7. Reinstall the light assembly to the

body of the vehicle.

Содержание Venue 2020
























































































































































































































































































































































































Результаты поиска

Содержание Venue 2020

Отзывы:

Похожие инструкции для Venue 2020

Бренды по названию

Популярные бренды

Huyndai Venue 2020, Руководство пользователя

Результаты поиска

Содержание Venue 2020

Отзывы:

Похожие инструкции для Venue 2020

Бренды по названию

Популярные бренды